home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
TeX 1995 July
/
TeX CD-ROM July 1995 (Disc 1)(Walnut Creek)(1995).ISO
/
macros
/
text1
/
fonts
/
cmsy12.mf
< prev
next >
Wrap
Text File
|
1991-10-23
|
5KB
|
97 lines
% This is CMSY12.MF in text format, as of August 22, 1986.
% Computer Modern Math Symbols 12 point
if unknown cmbase: input cmbase fi
font_identifier:="CMSY"; font_size 12pt#;
u#:=24.66/36pt#; % unit width
width_adj#:=0pt#; % width adjustment for certain characters
serif_fit#:=0pt#; % extra sidebar near lowercase serifs
cap_serif_fit#:=6/36pt#; % extra sidebar near uppercase serifs
letter_fit#:=0pt#; % extra space added to all sidebars
body_height#:=324/36pt#; % height of tallest characters
asc_height#:=300/36pt#; % height of lowercase ascenders
cap_height#:=295.2/36pt#; % height of caps
fig_height#:=278.4/36pt#; % height of numerals
x_height#:=186/36pt#; % height of lowercase without ascenders
math_axis#:=108/36pt#; % axis of symmetry for math symbols
bar_height#:=104.4/36pt#; % height of crossbar in lowercase e
comma_depth#:=84/36pt#; % depth of comma below baseline
desc_depth#:=84/36pt#; % depth of lowercase descenders
crisp#:=8/36pt#; % diameter of serif corners
tiny#:=8/36pt#; % diameter of rounded corners
fine#:=7/36pt#; % diameter of sharply rounded corners
thin_join#:=10.28/36pt#; % width of extrafine details
hair#:=12/36pt#; % lowercase hairline breadth
stem#:=30.6/36pt#; % lowercase stem breadth
curve#:=36/36pt#; % lowercase curve breadth
ess#:=27.2/36pt#; % breadth in middle of lowercase s
flare#:=38.6/36pt#; % diameter of bulbs or breadth of terminals
dot_size#:=46.6/36pt#; % diameter of dots
cap_hair#:=13/36pt#; % uppercase hairline breadth
cap_stem#:=37/36pt#; % uppercase stem breadth
cap_curve#:=42.6/36pt#; % uppercase curve breadth
cap_ess#:=39.6/36pt#; % breadth in middle of uppercase s
rule_thickness#:=.5pt#; % thickness of lines in math symbols
dish#:=1/36pt#; % amount erased at top or bottom of serifs
bracket#:=24/36pt#; % vertical distance from serif base to tangent
jut#:=36/36pt#; % protrusion of lowercase serifs
cap_jut#:=44/36pt#; % protrusion of uppercase serifs
beak_jut#:=12.2/36pt#; % horizontal protrusion of beak serifs
beak#:=84/36pt#; % vertical protrusion of beak serifs
vair#:=10.89/36pt#; % vertical diameter of hairlines
notch_cut#:=12pt#; % maximum breadth above or below notches
bar#:=13/36pt#; % lowercase bar thickness
slab#:=13/36pt#; % serif and arm thickness
cap_bar#:=13/36pt#; % uppercase bar thickness
cap_band#:=13/36pt#; % uppercase thickness above/below lobes
cap_notch_cut#:=12pt#; % max breadth above/below uppercase notches
serif_drop#:=4.8/36pt#; % vertical drop of sloped serifs
stem_corr#:=1/36pt#; % for small refinements of stem breadth
vair_corr#:=1/36pt#; % for small refinements of hairline height
apex_corr#:=0pt#; % extra width at diagonal junctions
o#:=9.3/36pt#; % amount of overshoot for curves
apex_o#:=9.3/36pt#; % amount of overshoot for diagonal junctions
slant:=.25; % tilt ratio $(\Delta x/\Delta y)$
fudge:=1; % factor applied to weights of heavy characters
math_spread:=0; % extra openness of math symbols
superness:=1/sqrt2; % parameter for superellipses
superpull:=1/6; % extra openness inside bowls
beak_darkness:=11/30; % fraction of triangle inside beak serifs
ligs:=2; % level of ligatures to be included
square_dots:=false; % should dots be square?
hefty:=false; % should we try hard not to be overweight?
serifs:=true; % should serifs and bulbs be attached?
monospace:=false; % should all characters have the same width?
variant_g:=true; % should an italic-style g be used?
low_asterisk:=false; % should the asterisk be centered at the axis?
math_fitting:=true; % should math-mode spacing be used?
% the following font parameters are explained in {\sl The \TeX book}, Appendix G
subs:=8/12; % subscripts to 10pt will normally be in 7pt type
rth#:=.4pt#; % assume that rules will come from cmex10
fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
math_axis#+3.51rth#+61/36pt#+subs*desc_depth#, % num1
math_axis#+1.51rth#+36/36pt#, % num2
math_axis#+1.51rth#+57/36pt#, % num3
-(math_axis#-3.51rth#-subs*fig_height#-148/36pt#), % denom1
-(math_axis#-1.51rth#-subs*fig_height#-36/36pt#), % denom2
11.32pt#-subs*asc_height#, % sup1
10.6pt#-subs*asc_height#, % sup2
124/36pt#, % sup3
61/36pt#, % sub1
-(9.5pt#-2subs*asc_height#-3.1rth#), % sub2
subs*asc_height#-36/36pt#, % sup\_drop
18/36pt#, % sub\_drop
23.9pt#, % delim1
12.1pt#, % delim2
math_axis#; % axis\_height
generate mathsy % switch to the driver file